low pressure water mist nozzle

Model OH-SW2 OH1 CEN

The OH FIREKILL™ OH-SW2 Automatic sidewall nozzle for OH1 applications

Min. water pressure

8 bar ≈116 psi

Max. working pressure

16 bar ≈232 psi

Drop size

DV90 < 300 μm

Water capacity design

72 m2 / 6 nozzles

Kv metric


Flow rate at min pressure

72.0 l/min

Nominal density

2.00 mm/m2


6.00 m x 6.00 m


Aesthetic fire protection

The FIREKILL™ OH sidewall nozzles are installed recessed into the wall with the nozzle rosette flush with the surface and the nozzle Cover Plate protruding 10-15 mm from the surface, being the only visible parts of the nozzle in its daily use or directly into a visible pipe system in retrofit cases. The FIREKILL™ OH nozzles can be delivered in different paint and finishes making the system blend in with almost any type of surface, securing the aesthetics of the surroundings. The nozzles can also be delivered with logo print.



The FIREKILL™ system for protection of ordinary hazard OH1 is unique as it requires very low water pressures and water flow rates. The system utilizes the automatic low-pressure water mist nozzles Model OH-SW2 which are patented automatic sidewall, fine water spray nozzles. The OH-SW2 nozzle creates a homogenous fine water mist, which absorbs heat, reduces radiant heat and causes oxygen depletion near the fire, which in turn controls and suppresses the fire. This homogenous mist consists of a high concentration of very small droplets. Because of the small mass of the droplets, the nozzle creates a large coverage, further minimizing the water expenditures and hydrating nearby combustibles.

Test and Approvals

DnV Third party witness

The FIREKILL™ OH-SW2 has been tested in accordance with VdS Fire test protocol for Sidewall Sprinkler systems, Protection of Office Spaces and Accommodation Areas with Watermist Sidewall Sprinklers and EN 14972:2020 Appendix A and witnessed by third party notified body according to EN ISO 17065.